Motor driver electronic project based on LV8741V
Using the LV8741V integrated circuit manufactured by Sanyo Semiconductor can be designed a very simple motor driver electronic project . The LV8741V is a PWM current-control stepping motor driver IC that simplify design of the motor driver control circuit .
As you can see in the circuit diagram , this motor driver electronic project based on the LV8741 IC require few external electronic parts and can provide a maximum current to the motor up to 1.5A .
The input voltage required by this motor driver electronic based on LV8741V is from 9.5 to 35 volts for powering the motor and from 2.7 up to 5.5 for the logic inputs of the LV8741V IC .
Some features provided by this motor driver electronic project based on LV8741 motor driver IC are : output short-circuit protection circuit , thermal shutdown circuit and power supply monitor circuit .
This IC is switched between standby and operating mode by setting the ST pin. In standby mode, the IC is set to power-save mode and all logic is reset. In addition, the internal regulator circuit and charge pump circuit do not operate in standby mode .
This motor driver electronic project based on LV8741V stepper motor driver IC has the following setting conditions :
2-phase excitation (MD1/DC11 = Low, MD2/DC12 = Low) , auto recovery-type output short-circuit protection function (EMM = Low) , reset function fixed to normal operation (RST = High) , chopping frequency : 37kHz (RCHOP = 43k ) .
This design can be changed , depending by your request ( for more details about how to change the design please consult the manufactured datasheet).
Add new comment