Using this circuit diagram can be made a voltage converter that allows laps positive voltage of existing power sources, or converting a negative voltage.
A voltage doubler circuit can be built using simple electronic diagram below. This electronic circuit has a very low production cost, is designed using a circuit type 74HC132 or 74HCT132. If the CLK signal is passed through the buffer available, are needed only four components, C4, C5, D1 and D2 to produce a voltage of 10 V to 5 V. If the power oscillator to be constructed from an unused gate, are required in addition two components: R1 and C3.
The most important circuit parameters are given in table.
Electrical diagram below serves as a fast voltage stabilizer which can charge high current. The circuit is based on a transistor BUZ10 SIPMOS type, which allows a high power dissipation and high current.
